Availability: 66 In Stock

About Puff Heat Transfer Vinyl 

*Actual sheet size can be up to 1/4” shorter than stated sheet size due to manufacturing specifications.

*Once heat it applied to our puff sheets, the shades will lighten and the colors will brighten.

Add a little dimension to your craft projects with Puff Heat Transfer Vinyl from iCraftVinyl.com. This textured material puffs up when heat is applied, creating a super unique 3D effect. Give this speciality HTV a try next time you want to raise the bar with your designs.

Puff HTV should not be layered. It is also a warm peel - make sure you peel the carrier sheet right after pressing to prevent inconsistencies in the puff effect.

Can be applied to cotton, polyester & cotton-poly blends.

Note - For the black & white puff HTV, pay extra attention to which side goes down on your cutting mat. The carrier sheet is not as shiny as it is with our other materials. Be sure the black and white are placed on your mat with the carrier sheet side down and the shiny side facing up. The other colors have a white backing and you will place those color side down on the mat. 

To tell the difference between the dark violet and black sheets, notice that the black will have a black backing and the dark violet will have a white backing. 

How to Apply Puff HTV from iCraftVinyl

After you cut and weed your heat transfer vinyl design, it is time to apply it to your garment. Our puff HTV is specialty material but it is super easy to work with, no matter your crafting experience. Puff heat transfer vinyl can be properly adhered using a heat press, home iron or EasyPress. 

Home Iron: 

  • Set your iron to the highest setting and firmly press your design for 15 seconds. No steam. Don't slide your iron, instead apply firm pressure in sections until your design is adhered.
  • Give it time to cool before removing carrier sheet.
  • Cover your design with Teflon sheet, parchment paper or a thin towel and do a final press for at least 15 seconds.

Heat Press: 

  • Set heat press between 300 and 305 degrees (this may vary as every heat press is different).
  • Press design for 10 seconds. When doing layers, press the first layers for 5-6 seconds before pressing last layer for full 10 seconds. Be sure to always cover any exposed HTV with a Teflon sheet, parchment paper or thin towel
  • Puff HTV is a warm peel. Peel immediately to prevent inconsistencies in the effect.
  • Cover your design with Teflon sheet, parchment paper or a thin towel and do a final press for 10 seconds.


  • Set your EasyPress to the proper setting for your project by adjusting the time and temperature using the +/- buttons. Use Cricut’s guide to help you out.
  • The orange light indicates your machine is heating up. Once it is green, it is ready to use.
  • Preheat your project material. Then apply your design. 
  • Place EasyPress on your HTV design and press the Cricut button to start timer. Hold in pace and use pressure until it beeps.
  • Flip project material and repeat on the backside of design.
  • Puff HTV is a warm peel.  Peel immediately to prevent inconsistencies in the effect.

Washing and Drying instructions for iCraftVinyl Puff HTV:

  • Allow your design to set on your garment for 24 hours before washing. HTV needs enough time to cure to ensure it is adhered.
  • Turn garment inside out before washing.
  • Do not use bleach or fabric softeners. Use a gentle detergent.
  • Wash in cold or warm water.
  • Dry flat or hang to dry.
  • Do not iron directly on to the HTV once applied.

Customer Reviews

Based on 1 review Write a review

Free And Fast Shipping

Free Shipping on All Orders Over $99

Best Quality Guarantee

What is a Great Price
Without Great Quality

We Are Here To help

Unbeatable Customer
Service, Around The Clock

You Also Might Like

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page